Features:
- Quick Change Pressure Modules (30 seconds): Additel’s 151 pressure control modules can be installed or replaced within 30 seconds or less. Simply open the upper edge of the cabin to open. As the door opens, the controller will automatically release pressure, providing the safe removal and installation of the ADT151 modules.
- Convenient Automatic Calibration of Internal Pressure Control Module: For production line users, higher frequency calibration and comparison of the pressure control module is an important guarantee means to improve the uncertainty of test calibration. The ADT783 can be connected with a external high-precision pressure module, which can be used to achieve regular comparison of the internal pressure control module, and can also realize the automatic calibration of the internal pressure control module.
- Modular Design, Easy Maintenance: The ADT783 adopts a variety of easy maintenance design methods, which can quickly change the pressure control module, quickly change the pressure control component, quickly clean the solenoid valve, and fine filtration of pollution particles.
- 20% Pressure Step Within 10 Seconds: In the process of efficient and fast-paced production line testing, verification and calibration, users have strict requirements on the speed of pressure controllers. ADT783 adopts professional control technology to effectively improve control rate and stability: control response time (typical) ≤10 Seconds, control stability (typical) ≤±(0.001~0.003)%FS, See specifications for more details.
- Vacuum Pump Automatic Start-Stop, Greatly Extending the Life of the Vacuum Pump: The ADT783 incorporates a built-in positive pressure/vacuum gas source with switching components. When controlling a small pressure above the atmospheric pressure point, it can be controllable and stable without connecting the vacuum pump. When controlling negative pressure or vacuum pressure, there is no need to utilize an external vacuum pump or protection components. A solid-state relay can be connected to the power supply line of the vacuum pump to realize fully automatic vacuum pump start-stop control, greatly extending the life of the vacuum pump.
- Volt Free Contacts: Volt Free Contacts enable control of peripheral devices such as vacuum pumps, ovens, etc. Each VFC option has three independent volt-free NO/NC relay contacts. A number of conditions can be set within a Additel instrument to trigger a relay toggling its contacts.
Specifcations:
- Power Requirements: Power supply: AC100~240 V, 50/60 Hz
- Power Requirements: Fuse: T3.15A 250V AC
- Power Requirements: Maximum Power consumption: 150W
-
Size /Weight: Chassis Size: 17.32 × 5.23 × 14.96 in (440(W) × 133(H) × 380(D) mm)
- Size /Weight: Rack Mount Dimensions: 3U-19” rack, Horizontal Direction
-
Size /Weight: Chassis weight: 16.9 kg
-
Size /Weight: Pressure module weight: 0.5 kg
-
Environment: Operating Ambient: 10℃to 50℃
-
Environment: Storage Temperature: -20 ℃ to 70℃
-
Environment: Operating humidity: 5%RH~95%RH, non-condensing
-
Environment: Altitude (Operation): <2000 m
-
Environment: Ingress Protection: IP20, Indoor use only
-
Environment: Vibration level: 2 G
-
Environment: Impact intensity: 4 G
-
Environment: Warmup Time: 15 minutes
-
Environment: Machine drop height: 250 mm
-
Conformity: CE
-
Communications: RS232, USB-A*2, LAN
-
Communications: WIFI, Bluetooth, GPIB, mouse, keyboard and other peripheral components can be expanded based on the USB port
- Communications: SCPI Command set is compatible with ADT780, PACE5000/6000, DRUCK DPI520, user customizable
-
External drive valve port: 3-channel external drive valves, green terminal connector with lock
- External drive valve port: Maximum driving ability 24 V / 12 W, 30 V max
- External drive valve port: One channel xed to the CPS pollution prevention device, the remaining 2 channels, users can be used to Control the external vacuum Pump and external isolation valve
-
I/O Alarm port: 3-channel, green terminal connector with a lock
- I/O Alarm port: Volt-Free No/Nc relay, the maximum current-carrying capacity: 24 V / 0.5 A, 30 V max
-
Pressure switch test port: One channel, green terminal connector with lock
-
Pressure switch test port: Maximum load 24 V / 0.1 A 30 V max
-
Pressure switch test port: Support mechanical switch, electronic switch testing
- Display: 7-inch capacitive touch screen, 1280 * 800 resolution, reective panels, black, white background can switch
- Display: Communication update speed: 10 times per second
- Display: Display refresh rate: 5 times per second
- Display: Pressure value maximum displays: + 9999999, display digits is adjustable
-
External pressure module: Measurement only
-
Internal pressure control module port: Opening the cabin door will automatically release the pressure for safe removal of modules
- Internal pressure control module port: Inside of cabin, 3 pressure module bays, from left to right
- Internal pressure control module port: including a high pressure module bay, a low pressure module bay, and a barometric pressure module bay
-
Warranty: 1 year
-
Hose & Filter End of Life: The estimated End of Life (EOL) expectancy for all accessory hoses and filters (pneumatic and hydraulic) is approximately 10 years and should be replaced at the first sign of wear or damage.
Resources:
