How RCS HY-Q-52 Works:ย
The metal strip with the two magnet sensors has to be mounted on the mast to measure the lifting and lowering speed of the carriage plate. When the carriage plate passes the trajectory between the two sensors, the indicator samples the hydraulic pressure output of the sensor approximately 1,000 times and calculates an average value. The weighing will be done UP and DOWN: the load is lifted, and then lowered, passing the two sensors within a predefined speed bandwidth. If the RCS HY-Q-52 is installed on a reach truck (or stacker truck) where the hydraulic pump is used for re-generating power during lowering, the menu and calibration should be set to weighing in UP-mode only.
Functions:ย
- Manual Zero Correction
- Self-learning Zero Correction
- Gross/Net Weighing
- Tare Memory for 10 Values
- ID-code entry for 4 ID-codes with 10 Preset Codes
- 10 Totalizing Registers
- Internal Clock for Date & Time
- USB Output for connection with Bar-Code Scanner
- Overload Indication based on Actual Hydraulic Pressure
- Error Message in Display Including Logging
Benefits:ย
- High Accuracy Hydraulic Scale
- User Friendly 5″ Touch Screen
- Intuitive Full Color Touch Screen
- Easy Calibration Due to Optimal Calibration Menu
- Overload Indicator in Display
- No Manifold block: Easy & Cost Effective Installation
- For use in Combination with Rotators and/or Clamps
- Less Sensitive to changes to load center point
- Suitable for rough applications
Standard Specifications:ย
- Capacities: 5,000 lb to 200,000 lb
- System Tolerance: +/- 0.2% of the scale capacity
- Display: full-color 5″ Touch Display
- Keyboard Display model defines the available keys
- Protection Class: IP65
- Power Supply: 9Vdc-100Vdc input, built-in regulator/convertor board
- Dimensions indicator: L x B x H = 3.35 x 6.5 x 4.53 inches
Graduation:
- 5 lb at 5,000 lb
- 10 lb at 10,000 lb
- 20 lb at 20,000 lb
- 50 lb at 50,000 lb
- 100 lb at 100,000 lb
- 200 lb at 200,000 lb
System Package:ย
- HY-Q-52 Indicator with 5″ Touch Screen
- RAM Indicator Mounting Support
- Oil Pressure Sensor G1/4″ BSP Male Thread
- Metal Strip with 2 Sensors for Mast Mounting
- Magnet to be Installed on the Carriage Plate
- Installation & Calibration Manual
- Operator Manual
Resources:ย
Options:ย
