The US-9011SS-EX indicator is Intrinsically Safe for use in dangerous areas. The iSafe indicator has multiple weighing units such as accumulation, counting, gross, tare, zero and multiple hold functions. The built in RS-232 port allows for use with printer, scoreboards, or computer software. Our removable battery pack allows the user the ability to recharge the battery in a safe environment if needed.
Features:Â
- Includes 110V AC Power Adapter
- Includes Rechargeable Battery
- Includes Mounting Bracket Set-up
- Gross/Tare/Pre-Set Tare/Zero
- Full Range Zero Setting up to 100%
- Stainless Steel Housing NEMA 4X Rated
- Weighing Units: LB, KG, G, OZ, or LB:OZ
- Accumulation, Counting, & Multiple Hold functions
- Overload / Underload alarm
- Date & Time Set-up for Printer / PC
- Built in Power Saving Mode
- RS-232 port for Printer / PC Communication
- 1″ Digits for LCD Digital Display
- Powers up to (6) 350 OHM Load Cells
Specifications:
- Display: LCD 1.5 inch x 6-digit numeric
- Units: Ib, kg (primary); oz, g (secondary)
- Accuracy Class: 5000 e
- Resolution: 120,000 dd industrial; 10,000 dd HB44
- Excitation Voltage: 5V DC
- Largest Output Current: 120 mA
- Excitation circuit: 5 VDC, 4 wire connections
- Load Cell: 6 load cells of 350 2 maximum
- Load Cell Excitation: 5 ‡ 0.5VDC
- Display Resolution: 30,000 ; ADC: 2,000,000
- Zero stability error: TKspn < ‡ 6 ppm//K
- Sensitivity (internal): 0.3 uV / d
- Input voltage: -30 to +30mV DC
- Power: 100-240VAC @ 50/60Hz
- Power Consumption: 5W @9VDC
- Operating Temp: 14 °F to 104 °F (-10 °C to +40 °C) <90%RH
- Weight: 4.3 Ibs (1.95 kg)
- Internal Resolution: 24 bit A/D Sigma-Delta; 1,048,000 d
- Display Resolution: 120,000 dd industrial; 10,000 dd HB44
- Display Increment: Selectable 1, 2, 5, 10, 20, 50
- Decimal Point: Selectable 0, 1, 2, 3, 4 decimal places
- Conversion Rate: 12 samples/second typical
- Analog Signal Input Range: 1mV/V to 3mVN
- Analog Signal Sensitivity: 0.1 uV/graduation (min)
- Measurement Rate: 0-15mV
- Auto Zero Tracking: 0 – 5 dd increments
- Auto Zero Delay: 0 – 3 second increments
- Motion Detect: 1 – 10 dd
- Motion Delay: 0 – 55 dd
Options:Â
- Add 4-20ma Output
- Add Relay / Setpoint Output
- Intrinsically Safe Battery Pack
- Thermal Printer
- Label Printer
- Indoor Remote Display 3″ Digits
- Indoor Remote Display 5″ Digits
- Outdoor Remote Display 6″ Digits
- Software
- Indicator Stand (stainless steel)
- Heavy Duty Indicator StandÂ
- Certificate of CalibrationÂ
Resources:Â
